Removing Rear W126 Door Panels
300SD, 280S, 380SEL, 420SEL, 500SEL, 560SEL

1. Remove two screws on the top back corner of the windows to remove that trim that hides a bit of the smaller rear window.

2. Remove the cover just behind the latch... use small screwdriver

3. Remove screw that is behind the latch.

4. remove the screw that is by upper door handle when you pull out the latch unit a bit.

5. remove two screws on bottom of door handle...

6. Remove the light on bottom of door...

7. Remove door locking pin cover by the rear of the door where it latch to body.

8. Lift door panel upward and then outward.

9. Reverse order to install

- Tiger